The RED EYE TEK 14MM Green Metallic Terminator Finish Revolution Pull Out V2-KP313-1 is a specialized component identified by its 14MM specification, Green Metallic Terminator finish, Revolution Pull Out configuration, and V2-KP313-1 model number.
Designed for shoppers who need a particular RED EYE TEK configuration, this product combines a recognizable metallic green appearance with a clearly defined 14MM size and model designation. The finish makes it an option for applications where appearance and component identification are important, while the V2-KP313-1 model number helps buyers distinguish it from other RED EYE TEK products.
Key Product Details
Green Metallic Terminator Finish
The Green Metallic Terminator finish gives this RED EYE TEK component a distinctive visual appearance. It is particularly suitable for buyers specifically seeking a green metallic finish rather than a standard or neutral finish.
Because finish names can distinguish between product variants, customers should compare the stated Green Metallic Terminator finish with the component they are replacing or matching.
14MM Specification
The 14MM specification is an important identifying characteristic of V2-KP313-1. Buyers should verify that their application calls for a 14MM component before ordering.
When replacing an existing part, compare the size specification, configuration, model number, and finish rather than relying on appearance alone. This helps reduce the possibility of selecting a similar-looking but incompatible variant.
Revolution Pull Out Configuration
This product is identified as a Revolution Pull Out configuration. The configuration name is useful when searching for a matching RED EYE TEK component or comparing different versions within the product range.
For replacement applications, verify the complete product designation, including RED EYE TEK, 14MM, Green Metallic Terminator finish, Revolution Pull Out, and V2-KP313-1.
Model Number V2-KP313-1
V2-KP313-1 provides a precise product identifier for this particular RED EYE TEK configuration. Using the full model number when searching, ordering, or requesting product information can make it easier to identify the intended item.
If you are replacing an existing component, check the original item or product documentation for V2-KP313-1 before completing your purchase.
Who Should Consider This Product?
The RED EYE TEK 14MM Green Metallic Terminator Finish Revolution Pull Out V2-KP313-1 may be appropriate for customers who:
How to Choose the Correct Variant
Before purchasing, confirm the following details:
Matching all available product identifiers is the safest way to select the correct variant.
Product Search and Identification
For online searches in the United States and Canada, the complete model number V2-KP313-1 is a useful identifier. Searches combining the model number with terms such as "RED EYE TEK," "14MM," "Green Metallic Terminator," or "Revolution Pull Out" can help distinguish this product from other variants.
Customers in the USA and Canada should also confirm retailer availability, shipping options, taxes, duties where applicable, and any regional purchasing requirements before placing an order.
USA Product Information
Customers shopping in the United States can identify this product using the complete designation: RED EYE TEK 14MM Green Metallic Terminator Finish Revolution Pull Out V2-KP313-1.
For U.S. orders, verify the product specifications against your existing application before purchasing. Availability, delivery times, pricing, and retailer policies may vary by seller and location.
Canada Product Information
Customers shopping in Canada can use the same V2-KP313-1 model number to identify the product. The full product name, including 14MM, Green Metallic Terminator, and Revolution Pull Out, can further help confirm the intended variant.
Canadian customers should review current availability, shipping charges, applicable taxes, possible import fees, and seller policies before ordering from a U.S. or Canadian retailer.
Product Benefits
Distinctive Appearance
The Green Metallic Terminator finish provides a visually distinctive metallic green appearance for customers who want a specific finish.
Clear Product Identification
The V2-KP313-1 model number provides a specific reference for identifying this product and distinguishing it from other variants.
Defined 14MM Size
The 14MM specification makes it easier to compare the product with an existing component or application requiring the same stated size.
Specific Revolution Pull Out Configuration
The Revolution Pull Out designation helps buyers locate the particular configuration they are seeking instead of selecting a product based only on color or appearance.
Frequently Asked Questions
What is the RED EYE TEK V2-KP313-1?
The RED EYE TEK V2-KP313-1 is a Revolution Pull Out component identified by a 14MM specification and Green Metallic Terminator finish.
What finish does the V2-KP313-1 have?
The V2-KP313-1 is specified with a Green Metallic Terminator finish.
What size is the RED EYE TEK V2-KP313-1?
This product is specified as 14MM.
What is the product configuration?
The product is identified as a Revolution Pull Out configuration.
How can I make sure this is the correct RED EYE TEK part?
Compare the complete product identification, including brand, 14MM size, Green Metallic Terminator finish, Revolution Pull Out configuration, and V2-KP313-1 model number, with your existing component or product documentation.
Is V2-KP313-1 the same as every RED EYE TEK 14MM product?
No. The V2-KP313-1 designation identifies a specific configuration. Other RED EYE TEK products may have different finishes, configurations, sizes, or model numbers.
Is the Green Metallic Terminator finish suitable for replacement matching?
It can be considered when you specifically need the Green Metallic Terminator finish. For a replacement, verify the model, size, configuration, and other applicable specifications before ordering.
Where can I buy RED EYE TEK V2-KP313-1 in the USA?
Availability depends on individual retailers and current inventory. Search using the complete model number "V2-KP313-1" together with "RED EYE TEK 14MM Green Metallic Terminator" to identify current U.S. listings.
Where can I buy RED EYE TEK V2-KP313-1 in Canada?
Canadian availability depends on retailers, distributors, and inventory. Using the complete V2-KP313-1 model number can help locate the correct Canadian listing or determine whether a U.S. seller ships to Canada.
Does the product come in other finishes?
RED EYE TEK may offer different product variants, but customers should verify the specific finish and model number for each listing rather than assuming that every 14MM product is available in the same finish.
USA-Specific FAQs
Can I order V2-KP313-1 in the United States?
U.S. availability depends on the retailer or distributor carrying the product. Confirm current inventory and shipping information before ordering.
What should U.S. buyers check before purchasing?
U.S. buyers should verify the 14MM size, Green Metallic Terminator finish, Revolution Pull Out configuration, and V2-KP313-1 model number against their application.
Is V2-KP313-1 a universal replacement?
Do not assume that the product is universal. Compatibility should be confirmed using the complete product specifications and the requirements of the existing application.
Canada-Specific FAQs
Is RED EYE TEK V2-KP313-1 available in Canada?
Availability can vary by retailer and inventory. Canadian customers should search by the exact V2-KP313-1 model number and confirm current Canadian shipping availability.
What should Canadian buyers consider when ordering?
Canadian buyers should verify product compatibility and review shipping costs, applicable taxes, potential import charges, delivery times, and the seller's return policy where applicable.
Can a U.S. retailer ship V2-KP313-1 to Canada?
Some U.S. retailers may offer Canadian shipping, while others may not. Confirm the seller's current international shipping policy before ordering.
Buying Guide
When selecting the RED EYE TEK 14MM Green Metallic Terminator Finish Revolution Pull Out V2-KP313-1, focus on exact product identification rather than selecting solely by appearance.
The most important identifiers are:
Brand: RED EYE TEK
Size: 14MM
Finish: Green Metallic Terminator
Configuration: Revolution Pull Out
Model: V2-KP313-1
If these specifications match the component or application you need, the product is easier to identify accurately during the purchasing process.
Final Product Summary
The RED EYE TEK 14MM Green Metallic Terminator Finish Revolution Pull Out V2-KP313-1 is a specifically identified RED EYE TEK component featuring a 14MM specification, Green Metallic Terminator finish, and Revolution Pull Out configuration. Its V2-KP313-1 model number provides a precise reference for product searches, replacement identification, and purchasing in the United States and Canada.
Always verify the complete model number, size, finish, configuration, and application requirements before purchasing to ensure you select the correct product variant.
Â
