The Exotic 14mm Exotic Glass Bowl with Pointed Handle – CC518 combines a 14mm connection format with a distinctive handled design for compatible glass setups. Created as part of the Exotic glass bowl range, model CC518 provides customers with a replacement or additional glass bowl that combines practical compatibility considerations with a recognizable Pointed Handle configuration.
The handle is one of the defining characteristics of CC518, providing a dedicated area that may assist with handling the bowl after it has cooled while also contributing to its decorative appearance.
Because a nominal 14mm connection does not establish universal compatibility, customers should verify the joint configuration, dimensions, clearance, and overall fit of CC518 before purchasing.
The defining feature of the Exotic CC518 Glass Bowl is its Pointed Handle design.
Rather than using the appearance of a basic glass bowl, CC518 incorporates a distinctive handle configuration that gives the accessory an easily recognizable profile.
The handle may provide a convenient handling point when inserting or removing a properly cooled bowl from a compatible glass setup. However, the handle should not be assumed to remain cool during use.
Always allow the bowl and handle to cool sufficiently before touching them.
The pointed handle should also not be used as a lever to force a tight or incorrectly fitted glass joint apart.
The Exotic Pointed Handle Glass Bowl CC518 is identified as a 14mm glass bowl.
This nominal size is an important compatibility specification, but it is not the only factor that determines whether the bowl will fit a particular glass setup.
Two products identified as 14mm can still differ in:
Joint configuration
Joint gender
Connection dimensions
Insertion depth
Surrounding clearance
Overall bowl dimensions
Glass design
For this reason, customers should compare the complete connection specifications of CC518 with the intended glass piece before ordering.
The Exotic CC518 can be considered as a replacement bowl when its specifications match the original component and receiving glass connection.
A replacement bowl can be useful when an existing compatible bowl has been damaged or when a customer wants an additional bowl available for the same supported setup.
Do not select a replacement based solely on the 14mm designation. The receiving connection and replacement bowl must be physically compatible.
If the bowl does not seat naturally and securely, do not force it into position.
CC518 can also serve as an additional bowl for customers who already own a compatible glass setup and want another design option.
Its Pointed Handle configuration distinguishes it from conventional bowls and other Exotic bowl designs, allowing customers to select an accessory based on both compatibility and appearance.
Before using CC518 with a different glass piece, repeat the compatibility check rather than assuming that every nominally 14mm setup uses an identical connection.
The Pointed Handle gives the Exotic 14mm Glass Bowl CC518 a distinctive visual identity.
This makes it suitable for customers interested in decorative glass accessories as well as replacement components.
Exact colors, decorative characteristics, glass composition, measurements, and other details should be confirmed from the current product images or specifications because these characteristics are not established by the product name alone.
The handle can provide a convenient contact area for handling the bowl once the component has cooled.
However, customers should remember that the entire glass bowl, including its handle, can become hot depending on how it is used.
Never assume that the pointed handle is heat-proof or permanently cool.
Allow sufficient cooling time before handling the bowl, and never use the pointed handle as leverage to force glass components together or apart.
Applying excessive sideways pressure to a glass handle can potentially damage the bowl or connected glass piece.
Before purchasing the Exotic 14mm Pointed Handle Glass Bowl CC518, customers should verify:
The stated 14mm connection size
Joint type
Joint gender
Connection dimensions
Insertion depth
Available clearance
Overall bowl dimensions
Compatibility with the receiving glass piece
Model number CC518
Current product configuration
This complete compatibility check is more reliable than selecting a bowl based solely on nominal joint size.
Handle the Exotic CC518 Glass Bowl carefully during installation, removal, cleaning, and storage.
Allow the glass to cool completely before cleaning. Use a cleaning method appropriate for the specific glass construction and avoid sudden temperature changes.
Do not strike the bowl against hard surfaces or use excessive pressure when connecting or removing it.
Inspect the bowl and pointed handle periodically for signs of damage.
A bowl that is cracked, chipped, fractured, or otherwise structurally compromised should not be used.
When CC518 is not installed, store it in a secure location where it cannot roll, fall, or collide with harder objects.
Extra attention should be given to protecting the Pointed Handle because projecting glass elements may be vulnerable to impacts.
Keep the bowl clean and dry before extended storage.
Customers searching for the Exotic 14mm Glass Bowl with Pointed Handle CC518 in the USA should verify the exact model and compatibility before ordering.
Availability, pricing, inventory, and shipping options can vary among retailers and locations throughout the United States.
Before purchasing, verify that model CC518 matches the connection specifications and dimensions required by the intended glass setup.
Canadian customers considering the Exotic Pointed Handle Glass Bowl CC518 should also verify complete compatibility before purchasing.
Availability, pricing, retailer inventory, and shipping eligibility can vary by retailer, province, or territory in Canada.
Customers should confirm the exact 14mm connection configuration, dimensions, clearance, model number, and current product specifications before ordering.
The Exotic 14mm Glass Bowl with Pointed Handle CC518 is a decorative glass bowl featuring a stated 14mm connection format and distinctive Pointed Handle design for compatible glass setups.
CC518 is the model designation associated with this specific Exotic Pointed Handle Glass Bowl.
The product is identified as a 14mm glass bowl. Exact dimensions beyond the nominal connection size should be confirmed from current product specifications.
The handle provides a distinctive design element and may offer a convenient handling area once the bowl has cooled completely.
It should not be assumed to remain cool. Glass near heated components can become hot, so allow the entire bowl and handle to cool before touching them.
Do not use the handle as a lever. Excessive sideways force can damage the handle, bowl, or connected glass component.
No. 14mm does not mean universally compatible. Joint type, gender, dimensions, insertion depth, and clearance should also be verified.
It can serve as a replacement or additional bowl when its specifications match the intended 14mm glass setup.
The product name does not specify joint gender. Confirm this specification from the current product information before purchasing.
Allow the bowl to cool completely and use a cleaning method appropriate for its glass construction. Avoid sudden temperature changes and excessive force.
No. Do not use the bowl if the handle or any other portion of the glass is cracked, chipped, fractured, or structurally damaged.
Verify the 14mm connection, joint configuration, dimensions, clearance, Pointed Handle design, model number CC518, and compatibility with the intended glass setup.
Availability can vary among retailers and locations throughout the United States. Customers should verify current inventory, pricing, shipping availability, and exact model specifications before ordering.
Availability can vary by retailer, province, or territory. Canadian customers should confirm current inventory, shipping eligibility, and product specifications before purchasing.
USA customers should verify the 14mm connection, joint configuration, dimensions, Pointed Handle design, model CC518, compatibility, retailer inventory, and shipping availability.
Canadian customers should confirm the 14mm connection, joint configuration, dimensions, model number, compatibility, retailer inventory, shipping eligibility, and applicable local requirements.
No. Nominally 14mm glass products can have different configurations and dimensions regardless of where they are sold. Exact compatibility should always be verified.
Potentially, but only when the joint configuration, dimensions, clearance, and receiving connection are compatible. Matching the 14mm size alone is not sufficient.
